uTmax6

uTmax6 is an open-source (GPLv3) fork of Nick Barton's uTmax, the host program for Ronald Dekker's uTracer tube curve tracers, aimed at the 1000 V uTracer6 on Linux, Raspberry Pi and Windows. The work: a software uTracer (simulator) so the program can be tested without hardware; tests that record wh

Test Equipment

uTmax6

Active · Software project (companion to the uTracer6) Curve Tracers — open-source host software and accessories for the uTracer6 Modern (2026; fork of uTmax 3.01, Nick Barton, 2013–)

Overview

uTmax6 is an open-source (GPLv3) fork of Nick Barton's uTmax, the host program for Ronald Dekker's uTracer tube curve tracers, aimed at the 1000 V uTracer6 on Linux, Raspberry Pi and Windows. The work: a software uTracer (simulator) so the program can be tested without hardware; tests that record what uTmax 3.01 does; bug fixes one per commit (several from Dean Jenkins' 2018 fork); reorganising and commenting the code; new features for the uTracer6 trunk case (touch layout, Matrix relay board, Tube Desk); hardware checks with dummy loads; and a user manual. Alongside it: a new 1 kV pin-switch ("Matrix") relay board compatible with Nick Barton's SetPins protocol, and a set of dummy loads, all published so anyone can repeat each step.

Deep dive

  1. Vol 1 uTmax6 — Vol 1: The Project
  2. Vol 2 uTmax6 — Vol 2: Progress
  3. Vol 3 uTmax6 — Vol 3: The Software uTracer
  4. Vol 4 uTmax6 — Vol 4: Dummy Loads
  5. Vol 5 uTmax6 — Vol 5: A 1000 V Pin-Switch Board